Concerns the press insert holders for ipr1000hP-110, ipr1500hP-130 and ipr1500hP-140.
The number after the dash denotes the outer diameter of the press inserts and at the same time the inner diameter of the press head fork. The holders accept various press insert sizes and each has the dimension indicated after the dash:
• The iprPA110 has an outer dimension of 110 mm.
• The iprPA130 has an outer dimension of 130 mm.
• The iprPA140 has an outer dimension of 140 mm.
In principle the press inserts are compatible with the holders, because the coupling is of identical construction. This means press inserts with an outer diameter of 110 mm can also be coupled to the iprPA130 and iprPA140 holders.
In principle there is nothing against using 110 mm press inserts in the iprPA130 holder. However, there are no tests that could prove usability with 100% certainty. To date no problems whatsoever have become known from practice.
Press inserts with outer diameters of 110 mm and 130 mm can NOT be used with the iprPA140 holder, because the dimensional tolerance is different and the inserts therefore do not achieve force-locking (Kraftschluss).
For using 130 mm press inserts in the ipr1500hP-140 press head, a special holder was designed: the iprPA140-for-130PE.