ipr850pes

General

Subcategory: Fußpumpe
Variant: —

Technical data

Motor power: —
Max. pressure: 850 bar
Usable oil volume: 700 ml
Flow rate: —

Dimensions & weight

Dimensions LxWxH: nicht angegeben
Weight: 7.0 kg

Equipment

Pressure gauge: ja, integriert bis 1.000 bar
Grounding: ja, Anschluss für Erdungsgarnitur

Special features

Antrieb für hydraulische Schneidköpfe, Pressköpfe und Sicherheitsschneidanlagen; sehr leichte sichere Bedienung; bequemes Arbeiten; wartungsarm; hohe Betriebssicherheit; Tank nachfüllbar; von außen einstellbarer Maximaldruck 10 - 850 bar; integriertes Manometer bis 1.000 bar; Anschluss für Erdungsgarnitur; automatische Förderumschaltung Niederdruck - Hochdruck

Safety notice: Always observe the operating manual before use. Please contact IPR with any questions or discrepancies.

Notes & FAQ

For all tools

Occasionally air in a hydraulic tool prevents it from working at full capability. The question is: how does the air get into the system? Please note the following: • After the hydraulic power unit's tank has been fully emptied and then refilled, the tank must be bled. • New hoses must be filled with oil before use. The same applies after hose testing. • If the nipples on the tool are replaced in-house, it is essential that whoever does so has first been instructed in bleeding the tool: when the fitted nipple is removed, the oil drains out and the oil chamber fills with air.

View all notes