Browse other power units
ipr Hydraulic Power Unit — Datasheet

ipr850HA-cube-stable

Werkzeugfinder Download as PDF
General
Subcategory
Hydraulikaggregat
Variant
—
Technical data
Motor power
—
Max. pressure
850 bar
Mains connection
110 - 230 V; 50 - 60 Hz
Usable oil volume
700 ml
Flow rate
1.0 l/min
Dimensions & weight
Dimensions LxWxH
410 x 260 x 305 mm
Weight
14.0 kg
Special features

geeignet für alle branchenüblichen Hydraulikwerkzeuge / -vorrichtungen; Druckbedarfserkennung mit Abschaltung nach Erreichen des Arbeitsdruckes (wenn Funktion eingeschaltet); Abschaltung bei Leerlauf; Tippbetrieb; Netzbetrieb; leistungsfähiges Netzteil mit Überspannungsschutz, -25 °C bis +70 °C; sensorgesteuerter Lüfter; geeignet für Industrieanwendungen; geeignet für Kabelrecycling; mit Aaronia Mesh Gewebe abgeschirmt

Safety notice: Always observe the operating manual before use. Please contact IPR with any questions or discrepancies.

Notes & FAQ
For all tools

Occasionally air in a hydraulic tool prevents it from working at full capability. The question is: how does the air get into the system? Please note the following: • After the hydraulic power unit's tank has been fully emptied and then refilled, the tank must be bled. • New hoses must be filled with oil before use. The same applies after hose testing. • If the nipples on the tool are replaced in-house, it is essential that whoever does so has first been instructed in bleeding the tool: when the fitted nipple is removed, the oil drains out and the oil chamber fills with air.
View all notes